Today YOUHA electric wheelchair manufacturer will explain to you how to charge the electric wheelchair correctly.
1. The newly purchased wheelchair may have insufficient battery power due to long-distance transportation, so please charge it before using it.
2. Check whether the rated input and output voltage of the charger is consistent with the power supply voltage.
3. The battery can be charged directly in the car, but the power switch must be turned off. It can also be removed and taken indoors to a suitable place for charging.
4. Please first connect the output port plug of the charging appliance to the charging jack of the battery properly, and then connect the charger plug to the 220V AC power supply. After charging, you should first unplug the charger output end from the wheelchair, and then Unplug the plug from the socket.
5. At this time, the power and charging indicator red lights on the charger light up, indicating that the power supply is connected.
6. A single charging time takes about 5-10 hours. When the charging indicator light changes from red to green, it means that the battery is fully charged. At this time, if time allows, try to continue charging for about 1-1.5 hours. Allowing the battery to obtain more energy. However, do not continue charging for more than 12 hours, otherwise the battery may be easily deformed and damaged.
7. It is prohibited to connect the charger to the AC power supply for a long time without charging.
8. Perform battery maintenance every one to two weeks, that is, after the green light on the charger turns on, continue charging for 1-1.5 hours to extend the service life of the battery.
9. Please use the special charger provided with the vehicle. Do not use other chargers to charge the electric wheelchair.
10. When charging, it should be done in a ventilated and dry place. The charger and battery should not be covered with anything.
Post time: Jan-17-2024