If you use a manual wheelchair, you may experience some challenges, especially if you must rely on someone else’s human power to move. However, you can convert your manual wheelchair into an electric wheelchair to make your life more comfortable and manageable. Read on to find out how to make your wheelchair electric.
Step 1: Get the right components
To build an electric wheelchair, you need a set of necessary components to convert your manual wheelchair into an electric wheelchair. Before getting started, you’ll need a few important things including the motor, battery, charger, joystick controller, and a set of wheels with compatible axles. You can source these components from reputable online or local suppliers.
Step 2: Remove the rear wheel
The next step is to remove the rear wheels from the wheelchair frame. To do this, you can turn the wheelchair over, remove the wheel locks, and gently lift the wheels out of the fixings. After that, carefully remove the wheel from the axle.
Step 3: Prepare New Wheels
Take the motorized wheels you purchased and attach them to the wheelchair axle. You can use screws and nuts to hold the wheels in place. Make sure both new wheels are securely attached to avoid any accidents.
Step 4: Install the Motor
The next step involves installing the motor. The motor should be mounted between the two wheels and secured to the axle using a bracket. The bracket that comes with the motor allows you to adjust the position and direction of the wheel rotation.
Step 5: Install the Battery
After installing the motor, you need to connect it to the battery. This battery is responsible for powering the motors during wheelchair operation. Make sure the battery is properly installed and seated in its case.
Step 6: Connect the Controller
The controller is responsible for the movement and speed of the wheelchair. Attach the controller to the joystick and mount it on the armrest of the wheelchair. Wiring up the controller is a simple process that only involves a few connections. After connecting all the wires, place them in the protective case and secure them to the frame.
Step 7: Test the Electric Wheelchair
Finally, you’ll need to test your newly manufactured electric wheelchair to make sure it’s in top working order. Turn on the controller and test its movement in different directions. Take some time to get used to the joystick and experiment with different speed settings to make sure they meet your needs.
in conclusion
Motorizing your manual wheelchair is a straightforward process that can help you gain greater freedom, mobility and independence. If you are not confident in assembling your electric wheelchair yourself, you can always hire a professional to do the job for you. Also, remember that electric wheelchairs require regular maintenance to keep them in good shape, so be sure to ask your supplier for tips on electric wheelchair maintenance and cleaning.
Post time: Jun-14-2023