zd

How to charge the electric wheelchair for the disabled

1. The purchased new wheelchair may have insufficient battery power due to long-distance transportation, so please charge it before using it.
2. Check whether the rated input value of charging is consistent with the power supply voltage.
3. The battery can be charged directly in the car, but the power switch must be turned off, or it can be removed and taken to a suitable place such as indoors for charging.
4. Please connect the output port plug of the charging appliance to the charging jack of the battery properly, and then connect the plug of the charger to the 220V AC power supply. Be careful not to mistake the positive and negative jacks.
5. At this time, the red light of the power supply and charging indicator on the charger will light up, indicating that the power supply has been connected.

6. A charging time takes about 5-10 hours. When the charging indicator turns from red to green, it means that the battery is fully charged. If time permits, it is best to continue charging for about 1-1.5 hours to make the battery Get more energy. But do not continue charging for more than 12 hours, otherwise it will easily cause deformation and damage to the battery.
7. After charging, you should first unplug the AC power plug, and then unplug the plug connected to the battery.
8. It is forbidden to connect the charger to the AC power supply for a long time without charging.
9. Do battery maintenance every one to two weeks, that is, after the green light of the charger is on, continue to charge for 1-1.5 hours to prolong the service life of the battery.
10. Please use the special charger provided with the vehicle, and do not use other chargers to charge the electric wheelchair.
11. When charging, it should be carried out in a ventilated and dry place, and nothing should be covered on the charger and the battery.

 


Post time: Nov-04-2022